The technological requirements for decorative wall films mainly include the following steps and precautions:
Preparation before construction:
Inspection and measurement: First check whether the construction site is suitable for construction. The measured area should be true and accurate, and the accuracy should be in centimeters.
Film cutting: Determine the model of decorative film required by the customer and cut the film accurately.
On-site processing: Put on work clothes and shoe covers, and check whether glass and other items are intact.
On-site protection: Process, protect, move, and take photos before filming to facilitate return after construction is completed.
Wall surface treatment:
Dust removal: Generally, water mist dust removal is used (mist water is sprayed in the film-pasting room or in front of the film-pasting window until the water mist falls to the ground) to reduce the impact of dust on the film.
Glass cleaning: Check whether the glass window is intact, whether there are cracks, missing, protrusions, depressions, scratches and firmness, and perform corresponding treatment.
Check the glass bead and frame: Clean the glass bead and frame until there is no mud, dust and impurities.
Film application steps:
Film opening, film application, positioning: Professional technicians use professional tools to paste to ensure accurate positioning.
Water scraping and edge cutting: First, use a soft scraper to drain 80% of the water to ensure that the diaphragm will not move on its own. Then use the tendon to scrape and drain finely, requiring uniformity without omissions. To prevent the diaphragm from absorbing water or generating bubbles and blisters due to uneven force. Use a film cutter to cut the edges based on the glass so that the film and the glass are completely overlapped.
Quality inspection and maintenance:
Quality inspection: During the film application process, the quality of each link must be strictly controlled to ensure that the final decorative effect meets the design requirements.
Maintenance and maintenance: After the construction is completed, proper maintenance and maintenance should be carried out to ensure the service life and effect of the decorative film.
