The daily maintenance of PVC floor film mainly includes daily cleaning, stain treatment and waxing maintenance.
Daily cleaning
Use a clean wet mop: Use a clean wet mop to clean the floor every day to avoid dust and debris accumulation and scratches on the floor.
Use a neutral detergent: For areas with severe pollution, you can use a neutral detergent for cleaning. Avoid using strong acid or strong alkaline detergents to avoid damaging the UV layer on the floor surface.
Avoid using a dirty mop: Be sure to use a clean mop for cleaning. Do not use a dirty mop to wipe all the time to avoid long-term dirt.
Stain treatment
Oil stain treatment: For local oil stains, pour the water-based degreaser solution directly on the towel and wipe; for large areas of oil stains, dilute the degreaser in a certain proportion and use a floor scrubber to clean. Oil stains should be treated in time to prevent oil stains from penetrating into the floor and causing stains that are difficult to clean.
Black offset printing treatment: For difficult-to-treat stains such as black offset printing, you can use spray cleaning maintenance wax with a high-speed polisher for polishing. For black offset printing that has been there for a long time, you can pour a strong black offset printing remover directly on a towel and wipe it off.
Glue or chewing gum treatment: You can use a professional strong glue remover to directly pour it on a towel and wipe it off. If glue or chewing gum is not cleaned in time, it will stick to the floor, affecting the appearance and use of the floor.
Waxing and maintenance
Regular waxing: To keep the PVC floor smooth and bright, it is recommended to wax it every 2-3 months. First clean the surface of the floor, then dilute the wax water and apply it evenly on the floor, wait for 5-10 minutes, then use a floor cleaning machine to remove the wax, then clean it with clean water and dry the floor, and then wax it after the floor is dry.
Maintenance of crowded places: In public places with large traffic, such as hospitals, supermarkets, etc., due to frequent personnel exchanges, the floor is more worn. It is recommended to shorten the maintenance cycle and increase the frequency of waxing.
