The maintenance of PVC edge banding mainly includes the following aspects:
Avoid direct sunlight and humid environment: Do not place PVC edge banding in the sun or in a too dry place to prevent the wood from cracking and deforming; at the same time, avoid placing it in a humid place to prevent the wood from swelling when wet and rotting over time.
Prevent chemical erosion: Do not use alkaline water or boiling water to wash PVC edge banding, and avoid placing high-concentration alcohol, banana water, and freshly boiled water and other hot things on the table to prevent damage to the paint surface.
Handle with care: Lift and place gently when carrying, avoid hard dragging and pulling; place it flat and stable, if the ground is uneven, pad the legs to prevent damage to the mortise structure.
Prevent heavy objects from pressing: Do not press heavy objects on the top of large wardrobes to prevent the doors from protruding and not closing tightly; do not stack too many clothes, avoid exceeding the doors to prevent deformation of the doors.
Regular inspection and maintenance: Regularly check the bonding of the PVC edge banding to ensure that it is not loose or falling off. If any problems are found, tighten or replace the sealing rubber ring in time.
Keep it clean: Clean the PVC edge banding regularly to remove dirt and debris. Avoid scratching with sharp objects to avoid scratching the surface.
Prevent UV aging: For PVC edge banding used outdoors, avoid long-term exposure to sunlight, and apply UV protection agent if necessary.
